Optimizing the antioxidant biocompound recovery from peach waste extraction assisted by ultrasounds or microwaves

The possibility to valorize peach juice waste, either frozen or air-dried, through microwave (MAE) and ultrasound assisted extraction (UAE) was evaluated. MAE power, UAE amplitude and time were optimized using a 2²-factorial design. For frozen waste, optimal MAE (540 W, 50 s) and UAE (23%, 120 s) processes gave extracts presenting analogous content (on 100 g dry matter) of polyphenols (309–317 mg GAE), flavonoids (94–120 mg QE), anthocyanins (8–9 mg CGE), and similar antioxidant activity (2.1–2.2 mg TE). Extracts from dried waste resulted higher in polyphenols (630–670 mg GAE) but lower in flavonoids (75–90 mg QE), anthocyanins and vitamin C (not detectable). Although developing an energy density 2-fold higher than that of UAE, MAE more efficaciously extracted vitamin C (108 mg/100 g dm) and required half extraction time (50 s). MAE would also be less impactful than UAE in terms of greenhouse gas emission and energy requirements on industrial scale. The industrial valorization of peach waste through the application of microwave or ultrasound assisted extraction requires quantitative data, able to encourage company interest and investment. This study not only identifies optimal MAE and UAE parameters to assist the extraction of peach waste bioactive compounds but also provides a preliminary estimation of the potential economic and environmental impact on an industrial scale of these technologies.     

Solubility study and intensification of extraction of phenolic and anthocyanin compounds from Oryza sativa L. ‘Violet Nori’

Oryza sativa L. ‘Violet Nori’ is an Italian cultivar of spontaneous growing aromatic purple rice which is particularly rich in polyphenolic compounds, especially anthocyanins, conferring it an excellent antioxidant capacity. The present study aimed at increasing the extraction yields of its antioxidant compounds with green strategies and it is divided into two steps. The first step concerned a solubility study of the targeted polyphenols in different ethanol:water mixtures by means of a theoretical prediction method, using the simulation program COSMO-RS, and the subsequently confirmation of the computational results by practical experiments. Once the best extraction mixture was identified, the second step of the work was performed, with the purpose of intensifying the extraction yield. Therefore, various innovative green extraction techniques, including ultrasound, using both the probe system and the ultrasonic bath, bead milling, microwave and accelerated solvent extractions were tested and compared to conventional maceration.Results, expressed in terms of total phenolic and total monomeric anthocyanin contents, showed that the best extracting solvent for ‘Violet Nori’ rice was the mixture ethanol:water (60:40 v/v), being COSMO-RS computational predictions in good correlation with the experimental results. Moreover, the most efficient techniques to extract the antioxidant compounds resulted to be both ultrasound-assisted extraction probe and bead milling, that in only 5 min got the same extractive efficiency obtained after 3 h of conventional maceration.     

Optimization of microwave‐assisted extraction for six inorganic and organic arsenic species in chicken tissues using response surface methodology

Response surface methodology was applied to optimize the parameters for microwave‐assisted extraction of six major inorganic and organic arsenic species (As(III), As(V), dimethyl arsenic acid, monomethyl arsenic acid, p‐arsanilic acid, and roxarsone) from chicken tissues, followed by detection using a high‐performance liquid chromatography with inductively coupled mass spectrometry detection method, which allows the simultaneous analysis of both inorganic and organic arsenic species in the extract in a single run. Effects of extraction medium, solution pH, liquid‐to‐solid ratio, and the temperature and time of microwave‐assisted extraction on the extraction of the targeted arsenic species were studied. The optimum microwave‐assisted extraction conditions were: 100 mg of chicken tissue, extracted by 5 mL of 22% v/v methanol, 90 mmol/L (NH₄)₂HPO₄, and 0.07% v/v trifluoroacetic acid (with pH adjusted to 10.0 by ammonium hydroxide solution), ramping for 10 min to 71°C, and holding for 11 min. The method has good extraction performance for total arsenic in the spiked and nonspiked chicken tissues (104.0 ± 13.8% and 91.6 ± 7.8%, respectively), except for the ones with arsenic contents close to the quantitation limits. Limits of quantitation (S/N = 10) for As(III), As(V), dimethyl arsenic acid, monomethyl arsenic acid, p‐arsanilic acid, and roxarsone in chicken tissues using this method were 0.012, 0.058, 0.039, 0.061, 0.102, and 0.240 mg/kg (dry weight), respectively.     

Preparation of novel ionic‐liquid‐modified magnetic nanoparticles by a microwave‐assisted method for sulfonylurea herbicides extraction

Ionic liquids immobilized on magnetic nanoparticles were prepared by an efficient microwave‐assisted synthesis method, and the properties of the ionic liquids were tuned based on the aromatic functional modification of its anion through a simple metathesis reaction. The novel as‐synthesized magnetic materials were characterized by various instrumental techniques. The magnetic nanoparticles have been utilized as adsorbents for the extraction of four sulfonylurea herbicides in tea samples, in combination with high‐performance liquid chromatography analysis. Significant extraction parameters, including type and volume of desorption solvent, extraction time, amount of adsorbent, and ionic strength were investigated. Under the optimum conditions, good linearity was obtained in the concentration range of 1–150 μg/L for metsulfuron‐methyl and bensulfuron‐methyl, and 3–150 μg/L for sulfometuron‐methyl and chlorimuron‐ethyl, with correlation coefficients R² > 0.9987. Low limits of detection were obtained ranging from 0.13 to 0.81 μg/L. The relative standard deviations were 1.8–3.9%. Comparisons of extraction efficiency with conventional solid‐phase extraction equipped with a commercial C₁₈ cartridge were performed. Results indicated that magnetic solid‐phase extraction is simple, time‐saving, efficient and inexpensive with the reusability of adsorbents. The proposed method has been successfully used to determine sulfonylurea herbicides from tea samples with satisfactory recoveries of 80.5–104.2%.     

Dialkyl phosphates determination by gas chromatography: Evaluation of a microwave‐assisted derivatization†

Dialkyl phosphates are organophosphate insecticide metabolites and their urinary analysis is useful for assessing human exposure to these compounds. This study presents a sample preparation method with microwave‐assisted derivatization for two dialkyl phosphates to make the process faster before gas chromatographic analysis. The optimized conditions for derivatization procedure were: 250 μL of 2,3,4,5,6‐pentafluorobenzyl bromide 3% in acetonitrile for derivative; microwave for 5 min with intensity of 160 W. The electron ionization mass spectrometric analysis was performed using a gas chromatography with mass spectrometry QP‐2010 from the Shimadzu^® equipped with RTx^®‐5MS capillary column. Ions were monitored at selected‐ion monitoring mode at m/z 350 for diethyl thiophosphate and m/z 366 for diethyl dithiophosphate. The developed method was linear for both metabolites. The intra‐assay precision was the values ranged between 1.1 and 9.1%, for diethyl thiophosphate, and between 4.06 and 6.9%, for diethyl dithiophosphate. The interassay precision showed relative standard deviation between 10.3 and 15.1%, for diethyl thiophosphate and between 4.9 and 11.9%, for diethyl dithiophosphate. The results obtained suggests that derivatization assisted by microwave, before gas chromatography with mass spectrometry analysis, can be applied to monitoring of exposure to organophosphates once is fast, sensible, and precise method to determinate dialkyl phosphates.     

Aqueous microwave-assisted DMAP catalyzed synthesis of β-phosphonomalonates and 2-amino-4H-chromen-4-ylphosphonates via a domino Knoevenagel-phospha-Michael reaction

An aqueous microwave (mw)-assisted DMAP catalyzed one-pot highly efficient route to synthesize β-phosphonomalonates and 2-amino-4H-chromen-4-yl phosphonates has been demonstrated via the domino Knoevenagel-phospha-Michael reaction of aryl aldehyde/salicylaldehyde, malononitrile/ethyl cyanoacetate and alkyl phosphite ester. Optimization of reaction conditions were performed by using conventional and microwave synthetic approaches. This conversion proceeded smoothly to deliver the desired product in good to excellent yields (75–95%) in a short reaction time (10–12 min). The present methodology is very simple, environmentally benign, high yielding and has very well demonstrated the synergistic effect of water and microwaves.     

Cu(II)/polyimide linked COF: An effective mesoporous catalyst for solvent-free 1,5-benzodiazepine synthesis

Copper(II)@polyimide linked covalent organic frameworks (Cu@PI-COF) under solvent-free and microwave assisted conditions have been used in an efficient one-pot protocol for the preparation of 1,5-benzodiazepines via 1,2-diaminobenzene, aromatic aldehydes and dimedone. By applying solvent-free conditions and microwave irradiation, three-component condensation provides safe operations, low pollution, quick access to products, and an easy set-up. As a result of its reusability, the catalyst can also be reutilized many runs without missing any activity.     

Effect of ZnO on sintering and microwave dielectric properties of 0.5CaTiO3-0.5 (Li0.5La0.5) TiO3 ceramics

The novel calcium titanate-lithium lanthanum titanate doped with zinc oxide (0.10, 0.30, and 0.50 mol. %) ceramic samples were prepared by solid-state reaction route. The phase formation, microstructure, densification, and microwave dielectric properties were investigated. It was found that the doping with zinc oxide led to a decrease in sintering temperature by 25 ^oC as compared with pure calcium titanate lithium lanthanum titanate due to the liquid phase effect. Also, the calcium titanate lithium lanthanum titanate (10ZCTLLT&30ZCTLLT)) doped with lower zinc oxide (0.10 and 0.30 mol. %) led to higher densification parameter. This was followed by increasing the zinc oxide doping up to (0.50 mol. %) which resulted in a decrease in densification and microwave dielectric properties which may be attributed to increase in porosity and grain growth upon the evaporation of zinc and oxygen vacancy. This led to the increase in dielectric loss (≈10 × 10^?4) value with 50ZCTLLT. Hence, the best result of microwave dielectric characteristics was obtained for 0.5CaTiO₃–0.5(Li_0.5La_0.5)TiO₃ with (0.10 and 0.30 mol. % ZnO) 10ZCTLLT and 30ZCTLLT ceramic samples sintered at 1175 ^oC/2h, with low dielectric constant (ε_r) = 4.4–10.5, very low dielectric loss = 1.07-2.23 × 10^?4 and high quality factor (Q x ?) ≈59-55 × 10⁴ at 8 GHz. Consequently, they can be used not only in wireless satellite communications technology but also can be used in the fifth-generation telecommunication 5G technology construction.